Frankie Muniz Racingallow the solder to come in contact with the hot tip while soldering. It is a common technique to "tin" the tip, or lightly coat the tip of the iron with solder, prior to making the joint. Use the iron to heat the joint. When the joint is hot enough, applied solder will melt on a nd flow around it. Allow very limited exposure of the joint to the solder, as less is more. Too much solder makes for a clunky and ineffecti ve joint. Do not disturb the joint until the solder has cooled and hardened completely.Quick Name If you have a group of children who don't free websites know each other very well, play this icebreaker game. Start by sitting the kids down in a circle. Pick a random player to start. He says his name and says a word. The player to his right then repeats the name and the word the previous player said and then says his name and a new Frankie Muniz Racing word. This pattern continues, with players getting disqualified if they forget the pattern, until only one player remains, having remembered . gg. When you say "Go," the players race to the opposite end and back to their teams without dropping the eggs from their spoons. If a player drops an egg, he has to start over. The first team to have all its players complete the race wins. Up, Down, Stop, Go Let the kids burn off energy with this game. Start by gathering the kids to an open area. During the game, you call out "up," "down," "stop" and "go." On "up," t he kids have to stretch their arms to the sky; on "down," the kids have to sit cross-legged; on "stop," the kids simply freeze in place; on paper texture "go," the kids run around to their hearts' content. The game ends whenever you want. Do As I Say, Not As I Do Allow the kids to feel all-pow erful with this game. Start by picking one player to become the leader. She stands facing the group. When ready, she begins the game by perf Frankie Muniz Racing orming any kind of movement, such as hopping on one foot or clapping her hands. However, she also gives an instruction to her group that dif . quipment from the machinery possible to lower the weight. This includes draining fluids such as oil. A few examples of equipment you might r emove are lathe beds, jigs, dies and feed tubes. Removing all excess equipment will help to reduce the weight the forklift must carry, and a lso help to reduce the possibility of dangerous weight shifting while on the forklift. 2 Raise the adjusting feet in each corner of the mach inery with a wrench. Raise the equipment to its maximum height. This will allow room for the forklift operator to get the forks of the forkl glock models ift under the machinery. 3 Slide the forks of the forklift under the machinery until the back support of the forks rests against the back of the machinery. Tilt the front of the forks up to keep the machinery pitched back against the fork rest. 4 Secure the machinery to the forkl Frankie Muniz Racing ift with several ratchet straps. Connect one end of each ratchet strap to the fork rest, wrap the strap around the machinery. Secure the oth .
|